Products

Short expiry stock (less than 6 months). Limited quantity.

Free chlorine water check, USEPA approved. No interference from chloramines (TMB procedure). Sensitivity down to 0.05 ppm using Aperture strip. Bottle of 50 strips. 0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4, >6 ppm

Learn More

Short expiry stock (less than 6 months). Limited quantity.

Be aware: You can only use this product with an eXact photometer.

eXact Micro pH test strips pH 6.2-8.4. To suit eXact Micro photometers. Bottle of 100 strips.

These test strips are not suitable for the eXact EZ & eXact iDip Photometer. If you are looking for test strips for these devices please click here.

Learn More

Intermediate Junction ORP Electrode with platinum disk and replaceable electrolyte.

Range:    ±2000mV

Sensor:   Platinum Disk

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

The New WaterWorks Chlorine Dioxide High Range water quality test strips have a very high range of detection with our patented indicator. With no bleaching of the indicator, even at high levels, the WaterWorks Chlorine Dioxide High is the ideal product when testing ClO2 sanitizing and disinfecting solutions. No external chemicals are needed to perform the water quality test.

Single dip and read test strip procedure and optimized color chart make the product ideal for technical and non-technical users alike for detection of Chlorine Dioxide in water - measures critical Chlorine Dioxide in water ranges (from 10– 2500 ppm) - NO BLEACH OUT of indicator like other tests.

Learn More

The eXact Strip Micro Total Bromine incorporates the patented eXact reagent delivery system created by Industrial Test Systems, Inc. which is ideal for technical and non-technical users. By dipping the eXact strip into a photometer cell, the exact amount of reagent is released into the water causing a change in color or turbidity. The change is measured by an eXact photometer giving the user fast and accurate results.

Bottle of 100 tests

Learn More

Short expiry stock (less than 6 months). Limited quantity.

Be aware: You can only use this product with an eXact photometer.

Glycine strips (used for chlorine removal in Chlorine Dioxide test). Bottle of 100 strips

Learn More

DPD4 PrimeLab & PoolLab Reagent Tablets - Pack of 10

Compatible with PoolLab 1.0 & 2.0

Learn More

Ionode Bromide ISE 1m BNC

Range (ppm):     0.79 - 79,900

pH range:            2 - 12

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   I⁻, S²⁻, CN⁻

Learn More

Semi-quantitative test strips for the determination of Peracetic acid. Ideal for rapid and easy analysis of Peracetic acid directly on-site. Can be used with test strip reader QUANTOFIX Relax. CE-certified according to the directive for medical products 93/42/EWG

Learn More

WaterWorks Bacteria Check Mini is ideal for home use and quick verifications. Simply remove the cap and fill water to the indicated line, shake, and let it sit for 48 hours at room temperature.

Learn More

• Replacement probe for PC60 Multi-parameter Pocket Tester
• Measures pH, conductivity, TDS, salinity, and temperature simultaneously for regular water solutions.
• High-sensitivity glass pH membrane
• Brush-Resistant Platinum Black (BPB) Sensor ensures accurate conductivity measurement in a wide range for general water solutions.

Learn More

• Replaceable pH probe for PH60 Pocket Tester
• Highly sensitive glass bulb membrane with a built-in temperature sensor, suitable for general water solutions

 

Learn More

Learn More

Learn More

Hydrogen Peroxide High Range for PrimeLab & PoolLab Pillow Reagent - Pack of 10

To perform this test, it requires the Acidifying PT reagent, it is automatically selected below, deselect it if you already have the Acidifying PT reagent.

Compatible with PoolLab 1.0 & 2.0

Learn More

Intermediate Junction pH Electrode with high-temperature capability and replaceable electrolyte.

pH Range:      0 - 14

Membrane:   A Glass – Spear

Body:              PVDF (Kynar) 

Temp:             0 - 100ºC

Learn More

The Select Scientific Water Quality Test Kit is specifically designed for testing Tank, Well and Bore water. Learn More

Suitable for PoolLab photometer

Contains:

• 20ml Calcium Hardness No1 (50 Tests)
• 20ml Calcium Hardness No2 (50 Tests)

Learn More

Suitable for PoolLab and PoolLab 2 photometers.

Contains:

• 20ml Total Hardness (1) Photometer Reagent (50 Tests)
• 10ml Total Hardness (2) Photometer Reagent (50 Tests)

Learn More

Reagent suitable for PoolLab photometer - pack of 10

Compatible with PoolLab 1.0 & 2.0

Learn More

Replacement Stirring Rod for PoolLab Photometer Learn More

A replacement vial for the PoolLab photometer Learn More

Replacement Light Shield for the Water-ID PoolLab Photometer Learn More

Cyanuric Acid PrimeLab & PoolLab Reagent - Pack of 10

Compatible with PoolLab 1.0 & 2.0

Learn More

Be aware: You can only use this product with a VERSION 2  Pool eXact EZ

Your Serial must be above PLEZ001311 to use this product. If your serial is below this please use this product.

Cyanuric acid test, sufficient for 60 tests

Learn More

Advanced fluorescence based optical sensor:

• No oxygen consumption, stable display in both static water and dynamic water
• Simple to use, No need to warm-up or frequently calibrate
• Maintenance free, No electrode membranes or electrolyte, service life of fluoresence cap >8000 hours
• Oxygen cap head has lightproof coating and is not affected by light and chemicals
• Equipped with electrode calibration sheath, for easy storage and calibration

Learn More

This test strip is ideal to test high levels of peroxide in solutions. The easy dip-and-read procedure provides reliable results within 45 seconds

Hydrogen peroxide (H2O2) is a powerful oxidizer, which is found in many disinfectants as the main active ingredient. In order to facilitate handling and save shipment costs, disinfectants come often as a concentrate. At the point of interest, they are then mixed with water to obtain the necessary disinfectant potency.

Learn More

Digital Pocket pH/Conductivity/TDS/Salinity/Temp Tester with ATC and Colour LCD.

Backorder dispatch time: 3-4 days

Learn More

Digital Pocket pH tester with ATC and Temperature readout. ±0.01 pH resolution and Colour LCD.

Current dispatch time: 3-4 days

Learn More

Digital Pocket Salt tester.

• Durable and waterproof to IP67 standards.
• Simultaneous temperature display
• Reading stability indicator.
• Large STN display with wide viewing angle.
• Calibration indication.
• Multi-point calibration with auto-recognition of standards.
• Battery life indicator.
• Floats in water.
• Extended working hours with 4 x AAA batteries.
• Lanyard and clip for convenience.

Learn More

Digital Pocket pH tester. Learn More

pH-Fix is a high quality, colour fixed pH test strip. pH range 4.5 - 10.0. Box of 100 sticks 6x85mm. CE Authorised for pH determination of urine. Learn More

pH‑Fix strips with chemically bound indicators are the bench mark for pH testing with test strips. The fixation prevents bleeding and therefore contamination of the sample. pH‑Fix 3.6–6.1 is also suitable for automatic evaluation with QUANTOFIX Relax.

Learn More

pH-Fix is a high quality, colour fixed pH test strip. pH range 7-14 with gradations of 0.5 pH unit. Box of 100 sticks 6x85mm Learn More

Range and sensitivity is 10, 50, 100, 200 ppm. Bottle of 200 papers.

Learn More

Chlorine dioxide test strips 0 - 500 ppm, with gradations at 0,10,25,50,100,250 and 500 ppm

Learn More

ECF-1 and ECF-1t are immersible cells recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids, alkalis. These can also be used for measurements in water paints. 

Learn More

ECF-1 is an immersible cell recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids and alkalis. These can also be used for measurements in water paints. 

Learn More

EDTA PrimeLab Reagent - Pack of 10 Learn More

Sulphate PrimeLab Reagent - Pack of 10 Learn More