PoolLab 2.0 - Pool Photometer

$398.97

The PoolLab 2.0 is the perfect solution for professional water analysis of pools and spas.

  • Able to test 24 Parameters (Additional reagents required)
  • Measure Three Parameters at Once
  • Bluetooth & Wifi
  • Large colour display
  • Exchangeable Cuvette
  • 4 Wavelengths (430nm, 530nm, 570nm & 620nm)
  • IP68 Waterproof
  • Free software (PC, App & Cloud)

Availability: In stock
SKU
WID-POL02

The PoolLab 2.0 is the perfect solution for professional water analysis of pools and spas. The fixed but exchangeable triple measurement-cuvette allows quick sampling by simply dipping the IP68 waterproof Pool LabⓇ into the water. THe device has 9 buttons to give quick access to the ZERO operation (only required 1 x per measurement batch) and to the 24 different pool water parameters.


The PoolLab 2.0 has both Bluetooth® and WiFi built-in to either actively connect to the free LabCom® software and app, or to automatically synchronize data with the LabComⓇ Cloud. Test results are always assigned to the measurement source accounts individually created by the user. In the LabCom® software and app, one can, among other things, print reports, calculate the active chlorine content and even receive dosage recommendations based on individually entered water treatment products. LSI index calculation is also offered via the software and app.


A free cloud service - with which PoolLabⓇ 2.0 can automatically synchronize data via WiFi - ensures that the software and app always work with the same database.


Parameters

    Active Oxygen (MPS)
  • Alkalinity
  • Aluminum
  • Ammonia
  • Bromine *
  • Calcium Hardness
  • Chloramines
  • Chlorine (fCl | cCl | tCl)
  • Chlorine (HR)
  • Chlorine dioxide
  • Copper
  • Cyanuric Acid
  • Hyd. Peroxide (LR)
  • Hyd. Peroxide (HR)
  • Iron LR
  • Nitrate
  • Nitrite (LR)
  • Ozone
  • pH
  • PHMB
  • Phosphate (LR)
  • Phosphate (HR)
  • Potassium
  • Sulphate
  • Total Hardness
  • Urea
  • Zinc

* Requires glycine tablets if chlorine is presents in the sample. Glycine tablets are not included in the basic kit.

Kit Contents

BASIC KIT: 

  • 1 x PoolLabⓇ® 2.0 with Bluetooth® and WiFi IP68 waterproof 
  • 1x Reagent Starter Kit
  • 1 x Triple measurement cuvette  (exchangeable) 
  • 1 x Light protection cap 
  • 3 x Plastic stirring rod 
  • 1x 10ml syringe 
  • 3 x AA batteries 
  • 1 x Printed user manual 
  • 1x Collecting bag 
  • Free LabCOM® software & Cloud Service

Reagent Starter Pack: 

  • 20 Tablets Phenol Red 
  • 20 Tablets DPD N°1 
  • 10 Tablets DPD N° 3 
  • 10 Tablets Alkalinity-M 
  • 10 Tablets CYA-Test 

PoolLab 2.0 FAQ

My PoolLab is missing a parameter (eg. Calcium Hardness), is it broken?


Some parameters can only be tested in chamber 2 (T2). These parameters will not appear in the T1 and T3 parameters lists. See below for the full list of these parameters.

  • 6 – Calcium Hardness
  • 12 – Cyanuric Acid
  • 22 – Phosphate (HR)
  • 23 – Potassium
  • 24 – Sulphate

Why can't I test these two parameters at the same time?


Some parameters can only be tested individually. If you select one of these parameters then try to select another it will remove the single test parameter. See below for the full list of these parameters.


  • 3 – Aluminium
  • 4 – Ammonia
  • 6 – Calcium Hardness
  • 15 – Iron (LR)
  • 16 – Nitrate
  • 17 – Nitrite
  • 21 – Phosphate (LR)
  • 22 – Phosphate (HR) 
  • 26 – Urea
  • 27 – Zinc

 

How do I stop my PoolLab turning off during long tests?

Some tests take a long time to run and can cause issues if the device turns off automatically while it is performing the test. To stop this, connect the PoolLab 2.0 to the LabCOM app, then in the device settings, change the "Auto Off Seconds" to 1200 or higher.

Write Your Own Review
You're reviewing:PoolLab 2.0 - Pool Photometer
pdf
(Size: 3 MB)
test
Search engine powered by ElasticSuite