Copper No1 and No2 Reagent Kit for PrimeLab & PoolLab photometers.
Kit includes:
Phosphate High Range (HR) No1 and No2 Reagent Kit for PrimeLab & PoolLab.
Kit Includes:
Phosphate Low Range (LR) No1 and No2 Reagent Kit for PrimeLab & PoolLab photometers.
Kit Includes:
Short expiry stock (less than 6 months). Limited quantity.
Total chlorine test strips. Two test ranges : 0.0 to 10.0 mg/L and 0.0 to 1.0 mg/L. Uses patented aperture technology for fast, accurate results. Bottle of 50 test strips.
Learn MoreShort expiry stock (09/2025). Limited quantity.
Ida's iron Test Strips, bottle of 25 to determine Fe2+ in 2 ranges: to 0.3 ppm & to 50 ppm.
Learn MoreIonode Fluoride Ion Selective Electrode
Range (ppm): 0.02 - 19,000
pH range: 5 - 7
Membrane: 8mm Crystal
Temp: 0 - 60ºC
Interferences: OH⁻
Learn MoreIH40A Sealed Gel pH Electrode with bullet membrane and S8/PG13.5 connector.
This electrode is intended to be mounted. Please check your mounting requirements before purchasing.
pH Range: 0 - 14
Membrane: A Glass – Bullet
Body: Polypropylene
Temp: 0 - 60ºC
Learn MoreSealed Gel Double Junction ORP Electrode
Range: ±2000mV
Sensor: Platinum Disk
Body: Polypropylene
Temp: 0 - 60ºC
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
The eXact Micro Chloride test strip comes in a bottle with 25 test strips. Suitable for use in the iDip Photometer.
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
The eXact® Strip Micro Total Hardness High test strip comes come in a bottle with 50 test strips used in the 525nm eXact®photometers.
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
If you have a Pool eXact EZ your serial number must be below PLEZ001311 to use this product. Otherwise, you need to use these test strips.
Cyanuric acid test, sufficient for 60 tests
Learn MoreGlass bodied refillable calomel reference electrode for laboratory use in various applications including corrosion, general electrochemistry etc.
Reference Potential: +244mV
Reference: Hg/Hg₂Cl₂
Body: Glass
Temp: 5 - 55ºC
Learn MoreCompatible with PrimeLab 2.0 and PoolLab 2.0
Learn MoreIntermediate Junction pH Electrode with high temperature capability and replaceable electrolyte. With superior thermal and chemical properties for operation up to 100°C.
pH Range: 0 - 14
Membrane: A Glass – Bullet
Body: PVDF (Kynar)
Temp: 0 - 100ºC
Learn MoreShort expiry stock (09/2025). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
eXact Micro Nitrate test strips. Bottle 50 strips.
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Home water quality testing helps identify quickly that your water is safe and healthy to drink.
Safe Tap Check™ Kit makes testing accurate, affordable, and easy. It tests four important parameters, pH, Copper, Total Hardness and Free Chlorine
Learn MoreShort expiry stock (08/2025). Limited quantity
Be aware: You can only use this product with an eXact photometer.
Phosphate test strips to suit eXact Micro photometers, bottle of 50 strips
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
eXact Micro Sulphate test strips. Bottle of 50 strips
Learn MoreIonode Surfactant (PVC) ISE 1m BNC
Range (ppm): 10 - 14,400
pH range: 2 - 12
Membrane: Polymer
Temp: 0 - 40ºC
Interferences: Organic anions and, Cations which resemble the species of interest
Learn MoreIonode Sodium (PVC) ISE 1m BNC
Range (ppm): 0.1 - 23,000
pH range: 2 - 12
Membrane: Polymer
Temp: 0 - 40ºC
Interferences: Li⁺, K⁺, Cs⁺, Ca²⁺, Tl⁺, Ag⁺, H⁺
Learn MoreIonode Water Hardness (PVC) ISE 1m BNC
Range (ppm): 1.0 to 10,000 ppm hardness as CaCO3 (10 µM to 1M)
pH range: 7 - 10
Membrane: Polymer
Temp: 0 - 40ºC
Interferences: Na⁺, K⁺, Zn²⁺, Fe²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Ba²⁺
Learn MoreIonode Calcium (PVC) ISE 1m BNC
Range (ppm): 0.1 - 40,000
pH range: 2.5 - 11
Membrane: Polymer
Temp: 0 - 40ºC
Interferences: Pb²⁺, Hg²⁺, H⁺, Sr²⁺, Fe²⁺, Cu²⁺, Ni²⁺, NH₄⁺
Learn MoreIonode Silver Sulphide ISE 1m BNC
Model | Parameter | Measuring Range | Temp. Range | pH Range | Main Interferences | Slope |
ISE-Ag2S | S2- |
0.003 - 32,000 ppm
|
0 - 60ºC | >11 | Hg+/2+ | 57mV/decade ± 3mV |
Ag+ | 0.01 - 108,000 ppm | 2 - 8 | 27mV/decade ± 3mV |
Ionode Nitrate (PVC) ISE 1m BNC
Range (ppm): 0.2 - 14,000
pH range: 2.5 - 11
Membrane: Polymer
Temp: 0 - 40ºC
Interferences: HS-, HCO3-, CO32-, H2PO4-, Cl-, Br-, I-, ClO4-, ClO3-, CN-, NO2-
Learn MoreIonode Iodide ISE 1m BNC
Range (ppm): 0.013 - 130,000
pH range: 2 - 12
Membrane: 8mm Crystal
Temp: 0 - 60ºC
Interferences: Br⁻, CN⁻, S²⁻
Learn MoreIonode Cyanide ISE 1m BNC
Range (ppm): 0.2 - 260
pH range: 5 - 7
Membrane: 8mm Crystal
Temp: 0 - 60ºC
Interferences: S²⁻, I⁻, Br⁻
Learn MoreIonode Chloride ISE 1m BNC
Range (ppm): 1.8 - 35,500
pH range: 2 - 12
Membrane: 8mm Crystal
Temp: 0 - 60ºC
Interferences: S²⁻,Br⁻, I⁻, CN⁻
Learn MoreIonode Phosphate Ion Selective Electrode
Range (ppm): 3.0 - 10,000
pH range: 4 - 5
Membrane: 8mm Crystal
Temp: 0 - 60ºC
Interferences: Redox active species
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
eXact Micro pH test strips pH 6.2-8.4. To suit eXact Micro photometers. Bottle of 100 strips.
These test strips are not suitable for the eXact EZ & eXact iDip Photometer. If you are looking for test strips for these devices please click here.
Learn MoreIntermediate Junction ORP Electrode with platinum disk and replaceable electrolyte.
Range: ±2000mV
Sensor: Platinum Disk
Body: Polypropylene
Temp: 0 - 60ºC
Learn MoreShort expiry stock (less than 6 months). Limited quantity.
Be aware: You can only use this product with an eXact photometer.
Glycine strips (used for chlorine removal in Chlorine Dioxide test). Bottle of 100 strips
Learn MoreCompatible with PoolLab 1.0 & 2.0
Learn MoreSemi-quantitative test strips for the determination of Peracetic acid. Ideal for rapid and easy analysis of Peracetic acid directly on-site. Can be used with test strip reader QUANTOFIX Relax. CE-certified according to the directive for medical products 93/42/EWG
Learn MoreWaterWorks Bacteria Check Mini is ideal for home use and quick verifications. Simply remove the cap and fill water to the indicated line, shake, and let it sit for 48 hours at room temperature.
Learn More